Tronex General Purpose Pliers & Cutter Set, Long Jaw In Case (Long Ergonomic Handles)

Introduction

General purpose, long ergonomic handle, long tipped set contains one each of: Tronex Pliers P711, P731, P744 & 7223 cutters.

This set with its long tips, is great when you need that extra reach. If you don’t need the extra reach of the long tips, we recommendthat you take a look at the short tipped version of this set as it will be stronger.

P711:Chain nose pliers are an essential tool for jewelry artists. They are used for holding, gripping and bending wire.Overall Length: 6.5 (165mm) – Tip Length: 1.3 (33mm)
RecommendedAWG usage: Throat: 16 gauge and finer – Tips:20 gauge and finer.

P731:Round nose pliers are typically used for making loops or creating round bends in wire.Overall Length: 6.4 (162mm) – Tip Length: 1.25 (32mm)
RecommendedAWG usage (Soft Copper Wire): Throat:18 gauge and finer – Tips: 24 gauge and finer.

P744:Flat nose pliers are used for gripping and bending wire.Overall Length: 6 (152mm) – Tip Length: .8 (20mm)
RecommendedAWG usage (Soft Copper Wire): Throat: 16 gauge and finer – Tips: 18 gauge and finer

7223:This MediumTaper Relieved Head Cuttersis Tronex’s most popular cutter.Pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity.
Overall Length: 5.6 (142mm) – Tip Length: .45 (11mm)

Cutting Capacity (rating is for soft copper wire)

• P711: Chain Nose – Smooth Jaw
• P731: Round Nose
• P744: Flat Nose – Short Smooth Jaw
• 7223: Taper Head, Relieved, Razor Flush Edges
• BYOK-T: Zipper Case