Foredom H.MH-110 Micromotor Reciprocating Hammer Handpiece

Introduction

Hammer handpiece for stone setting and engraving. Comes in Brush Type Kits K.1080 and K.1090, and Brushless Dual Handpiece Kit K.1053. This reciprocating handpiece has a slender, contoured grip and impact adjusting ring for precise hammering work. It operates from 0-2,500 strokes per minute. The force of the impact of this reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed of the hammer action can also be varied from 0-2,500 strokes per minute with the manual dial on the control box, or the optional foot pedal. Used with the Graver Holder, HPMH-011 handpiece becomes a precision power engraver, without the need for an air compressor or a flexible shaft drive.

Specifications:
6-1/4 overall length, 9/16 grip dia., 1 motor dia., 13 oz/369 gr., 1.5 amps (115v), .75 amps (230v). CE marked.
Comes supplied in Kits K.1080, K.1090 and Dual Handpiece Kit K.1053. Also works withthe same HP4-917 ControlUnit that comes withMicromotor KitK.1070.

SHIPPING METHOD: This item must ship via UPS. During the checkout process you may be offered Priority Mail but this item must ship via UPS. If you select Priority Mail, it will only slow down the process as we will have to change the shipping method after the fact and charge the difference. We have learned the hard way to not ship fragile or high value items via Priority Mail.

,

Check Out The Foredom Tools Catalog

makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.

B066B